Novoflex TrioPod PRO75 Carbon Fibre 3-Section

Novoflex TrioPod PRO75 Carbon Fibre 3-Section

The TrioPod PRO75 develops the original Novoflex modular tripod concept into a heavy duty version capable of supporting the most demanding loads. The 3-section leg version offers maximum stiffness and stability, but thanks to its reverse-folding legs, is only 69cm in length when folded. The legs can be detached and replaced with any of the other TrioPod leg, including short versions (3 mini macro legs are included).

The wide flat platform provides a stable base for large heads, and can be removed to allow a geared centre column to be used for extra working height. To make levelling easy, the MagicBalance PRO75 slots into the tripod base. Other makers’ accessories are also compatible. With 6 leg angle settings, not only does the PRO75 offer normal and ground level operation, but also allows one leg to be set at an angle against a wall, or with all the legs reversed, the centre column to be used at ground level without the need to remove it from the spider.

• Leg angles of 23°, 45°, 65° and 87° plus 155° to lean one or two legs up against a wall. Reversing all the legs allows a 43° setting to be engaged to enable ground-level working with a centre column. No need to remove it!
• 8-layer, 3-section carbon fibre legs, adjustable from 60.5cm-161cm.
• The flat 75mm diameter camera plate with 3/8” thread is secured by 3 Allen key set screws, and can be replaced by the MagicBalance PRO75 levelling base or the TRIO-CC PRO75 geared centre column. The aperture will also accept accessories from other manufacturers such as Gitzo and Benro.
• Threaded side hole allows Novoflex arms and other accessories with a ¼” thread to be attached to the tripod.
• Each leg screws firmly in place so there is no play between the top of the leg and the base, but when detached can be used as a monopod (the supplied accessory QPMONO screws on the top to create a flat platform with a ¼” screw to mount a small ball head).
• Rubber feet can be replaced by supplied stainless steel spikes.
• Includes 3 x mini macro legs, spiked feet, monopod conversion plate, handy Multitool and padded carrying bag.

• No of sections:  3
• Maximum height:  154cm
• Lowest working height:  5.5cm
• Length closed:  69cm
• Weight:  3.205kg
• Maximum load:  65kg
• Head connection:  3/8″
• Top platform diameter:  75mm