Novoflex TrioPod Aluminium Kit TRIOA2840 4-Section

Novoflex TrioPod Aluminium Kit TRIOA2840 4-Section

The TrioPod A2840 is a very versatile modular aluminium camera tripod, with 4-section legs. The legs screw into the TrioPod base, so it can be used as a conventional tripod or converted to a robust and strong table-top support using the included MINI legs. The compact size of the central base also enables the legs to fold parallel to give the tripod minimal closed bulk. Each leg screws firmly in place so there is no play between the top of the leg and the base, and can be set at 4 different angles. A carrying bag is also included.

• Top platform diameter is 60mm. The standard 1/4″ screw can be reversed to a 3/8″ stud if required.
• As well as standard height versions in 3- or 4-sections, there is now a Compact 4-section model with a 125cm maximum working height.
• A socket on the side allows arms or rods to be attached to support lights or other accessories. 3/8″ with supplied 1/4″ adapter.
• A press button allows each leg to be set at any one of four angles: 20°, 40°, 60° and also 87° to enable ground level photography.
• A detached leg can be used as a monopod (the supplied accessory QPMONO screws on the top to create a flat platform with a ¼” screw to mount a small ball head).
• Rubber feet can be removed to reveal stainless steel spikes.
• If you plan on a walking trip with a companion, weight and space can be saved by using two of the QLEG WALK III trekking poles in place of two standard legs. Use the poles for walking, remove the grips and just attach to the TrioPod base along with the standard leg, which with the base can be easily stowed in or on a rucksack.

• No of sections:  4
• Maximum height:  148cm
• Lowest working height:  6.5cm (with MINI legs)
• Length closed:  54cm
• Weight:  1.75kg
• Maximum load:  20kg
• Head connection:  3/8″ or 1/4″
• Top platform diameter:  60mm