ARRI SkyPanel S30-C Light
£3,960.00 Incl. VAT£3,300.00 Excl. VAT
The Arri SkyPanel S30-C is a smaller, more portable version half the length of the S60, it is perfect for on-the-go mobile applications.
Shown as in stock, please call to confirm
We recommend these products too
-
ARRI L10-C Studio Light
Lighting, Continuous LightingThe Arri L10-C - Innovative Features and rugged durability.
Arri SkyPanel S30-C
The Arri SkyPanel S30-C is a smaller, more portable version; half the length of the S60, it is perfect for on-the-go mobile applications. The S360 is the largest and brightest SkyPanel with four times the output of the S60 and almost six times the aperture size. The S360 is perfect for lighting large areas with tuneable, soft light. S30 and S60 models are available in fully color tuneable and remote phosphor versions.
Unlike other tuneable fixtures, SkyPanel makes no sacrifice when it comes to light output. SkyPanel puts out a tremendous amount of light, in a soft and uniform beam field. Brighter than a 1 kW tungsten soft light or a 3 kW tungsten space light, the SkyPanel S30 has more than enough light for most applications. At the same time, the lamphead is able to perform beautifully at lower light levels. This range of illumination and color gives users an unprecedented amount of control.
Lamphead | S30-C |
Optical System: | Soft Diffusion Panel |
Light Aperture: | 355 x 300 mm / 14 x 11.8″ |
Beam Angle: | 115º (Half Peak Angle) |
Weight: | Manual Version: approx. 8 kg / 18 lbs Pole Op Version: approx. 9 kg / 20 lbs |
Packed Weight: | Manual Version: approx. 14 kg / 31 lbs Pole Op Version: approx. 16 kg / 35 lbs |
Size w/ spigot (H x W x L): | Manual Version: 499 x 133 x 397 mm / 19.6 x 5.2 x 15.6″ Pole Op Version: 567 x 133 x 397 mm / 22.3 x 5.2 x 15.6″ |
Size w/o spigot (H x W x L): | Manual Version: 426 x 133 x 397 mm / 16.8 x 5.2 x 15.6″ Pole Op Version: 452 x 133 x 397 mm / 17.8 x 5.2 x 15.6″ |
Packed Size (H x W x L): | 670 x 293 x 458 mm / 26.4 x 11.6 x 18″ |
Handling: | Aluminum Yoke, High Strength Tilt Lock Pole Operation Option (Pan & Tilt) |
Mounting: | 16 mm / 28 mm Combo Pin (Baby 5/8″ / Junior 1-1/8″ Combo Pin) |
Tilt Angle: | +/- 90º |
Lamphead Voltage Input: | 48 V DC |
Power Consumption: | 200 W Nominal, 220 W Maximum |
Lamphead Power Connection: | Male 3-Pin XLR – 15 Amp (Pin 1: Negative / Pin 2: Positive) |
Battery Connector: | Male 4-Pin XLR – 10 Amp (Pin 1: Negative / Pin 4: Positive) |
Battery DC Voltage Range: | 23 to 36 V DC |
Battery Mode Light Output: | 100 % of total output |
White Light: | 2,800 K to 10,000 K continuously variable correlated color temperature |
Colored Light: | Full RBG+W Color Gamut with Hue and Saturation Control |
Color Temperature Tolerance: | +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal) |
Color Rendition: | CRI Average > 95 TLCI Average > 91 |
Green-Magenta Adjustment: | Continuously adjustable (Full Minusgreen to Full Plusgreen) |
Dimming: | 0 to 100 % continuous |
Control: | On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net |
Remote Device Management (RDM*): | DMX Setup, Hour Counter and Standard RDM Commands |
Software Interface: | Ethernet: DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac USB-A: Software upgrade via flash drive |
Housing Color: | Blue/Silver, Black |
Ambient Temperature Operation: | -20 to +45ºC (-4 to +113ºF) |
Protection Class / IP Rating: | III / IP20 |
Estimated LED Lifetime (L70): | 50,000 hours |
Estimated Color Shift Over Liftetime: | +/- 5 % |
Certifications: | CE, CB, ENEC, cNRTLus, FCC, PSE |
Power Supply Unit | S30 PSU |
Power Supply Input Range: | 110 to 240 V ~, 50/60 Hz |
Power Supply Output Range: | 48 V DC |
Power Input Connection: | powerCON TRUE1 (Bare Ends / Schuko / Edison cables available) |
Power Output Connection: | Female 3-Pin XLR – 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through) |
Weight: | 2.1 kg / 4.6 lbs |
Dimension: | 388 x 115 x 91 mm / 15.3 x 4.5 x 3.6″ |
Control: | On-Board On/Off Switch |
Mounting: | SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter |
Certifications: | CE, CB, ENEC, cNRTLus, PSE |
* RDM Available in Future Firmware: | Note: All specifications are nominal / typical values. |
Additional information
Brand |
---|
Reviews(0)
There are no reviews yet.