The Arri L7-C LED fixtures have taken forms that demand sacrifices in the quality of lighting designs, this is unique in that it fits perfectly into established working practices. This means that lighting designers will not have to adapt their creative techniques, nor will studios have to change their operating procedures; conventional Fresnels can be exchanged for L7 Fresnels on a like-for-like basis, achieving substantial and immediate cost savings with minimal disruption.
The Arri Studio Light L7-C color temperature, tint and hue can be continuously adjusted from 2,800 K to 10,000 K, between full plus or minus green and RGBW colors.
L7-Cs with Light Engine 2 are 25 % brighter than previous versions
Fully Tuneable from 2,800 to 10,000K
Plus/Minus green correction
Vibrant Color Selection (RGB+W Color Gamut)
Hue and Saturation Control
High Color Rendering
Low Power Consumption (160W Nominal)
True Fresnel Lens Light Characteristics
Onboard DMX In and Out
USB Mini Connection for Firmware Updates
Available in Blue/Silver and Black
Fan Mode Selection
powerCON TRUE1 Power Connector
LIGHT ENGINE 2 L7-Cs with the new LE2 are 25 % brighter than previous L7-C versions. STAND-MOUNT versions include the following base configuration: 28 mm Spigot (Junior Pin), Inline Switch, Integrated 5-Pin DMX In and Thru.
HANGING versions include the following base configuration: 28 mm Spigot (Junior Pin), 1,5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.
POLE-OPERATED versions include the following base configuration: Pole Operation for Pan, Tilt and Focus, 28 mm Spigot (Junior Pin), 1,5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.