Kaiser RSP Motorised Copystand and HF Lighting System.
The Kaiser RSP Motorised Copystand and HF Lighting System comprises of…
RSP Repro Column.(5612). Made of special aluminum tube, black anodized, with printed cm and inch scales. Height adjustment motorized, with two speeds. Cable remote control. Constant adjustment speed, independent of load. Any height position is exactly held via self-limiting worm-gear. Automatic end switch by photo sensors. Camera platform horizontally adjustable by parallel guides with friction drive, hand cranks for right-hand/left-hand operation, two locking screws. Build-in spirit level. Camera mounting plate 13 x 13 cm (5.1 x 5.1 in.), tiltable by +/- 90°.
Column height: 150 cm (60 in.)
Maximum load: approx. 15 kg (33 lbs.)
Mounting thread: 1/4” / 3/8” exchangeable
RePRO Table Frame (5615). With aluminum die-cast base for 5612 column. Demountable steel tube construction. Stacking tray 80 x 50 cm (31 x 20 in.) Height-adjustable feet.
Height without base: approx. 88 x 66 x 78 cm (34.6 x 26 x 30.7 in.)
required floor space: 88 x 104 cm (34.6 x 41 in.)
RePRO Baseboard (5616). To be inserted in the 5615 Table Frame.
Dimensions (WXD): 80 x 60 cm (31.5 x 23.6 in.). High-compressed wooden material, all-side plastic-laminated, with printed grid and cm and inch scales. Includes slide-in carrier for control box of optional lighting unit.
RB 5056 HF Lighting Unit (5656). Two light banks with high-gloss inside reflectors. Light emitting area 64 x 21 cm (25.2 x 8.3 in.) each. Each bank is equipped with two 55 watt daylight fluorescent lamps, color temperature 5400 K, CRI = 90-100. All-electronic high-frequency operating system (approx. 40 kHz) for immediate ignition and flicker-free operation, can be used with line scanner, micro scanning and multishot digital cameras and backs. Lights can be tilted and shifted. Horizontal lamp arms can be adjusted continuously in height. Vertical lamp arms with height markings, tiltable with detents. Mounted with strong die-cast clamp bases, clamp width 15 to 55 mm (0.6 – 2.1 in.). Separate control box. Lamps can be
switched individually. Cord: 2.50 m (8 ft.)
Counter-balanced height adjustment. RA 1 camera arm with camera adjusting device, can be set to different camera bodies. Features non-reflecting matt black base plate with grid and height-adjustable feet, Spirit level in column base, 2.7" wide low-vibration column made of matt black anodized aluminum tubing with scales. The unit also features Height adjustment with hand crank and Camera arm with interchangeable thread (except RS 1 microdrive).