For a limited time only, Teamwork Digital are offering you an EIZO ColorEdge CX271 LCD Monitor complete with an EIZO Monitor Hood and free UK mainland delivery for just £975.00 + VAT
So much to see. So simple to maintain.
The CX271 offers photographers and designers an abundant 3.7 megapixels across its 27-inch screen. It comes with EIZO’s ColorNavigator calibration software and a built-in SelfCorrection sensor that maintains calibration settings according to your schedule.
Built-In Sensor for Simplified Maintenance
Built-in Correction Sensor Automatically Maintains Your Settings
The CX271 is equipped with a built-in correction sensor housed within the front upper bezel. This sensor records your adjustment results, and maintains the white point and brightness values by automatically readjusting the settings at specific intervals that you determine. Even if the monitor is switched off or not connected to a computer, it will stick to its preset schedule and self correct.
What's New with the ColorEdge CX271
Reproduces 99% of the Adobe RGB Colour Space
An IPS panel with a wide colour gamut reproduces 99% of the Adobe RGB colour space so images shot in RAW can be converted to Adobe RGB or images shot in Adobe RGB will be displayed correctly. The colours seen in photos of vibrant blue skies and lush green forests will be reproduced faithfully. The wide colour gamut also ensures that the monitor reproduces almost the entire ISO-coated and US web-coated CMYK colour spaces used in printing as well as 93% of the DCI used in post production.
Excellent Tone Display in the Dark
When viewing the screen from an angle in a dimly lit room, dark tones typically appear washed out due to the display characteristics of LCD backlights. The monitor maintains a high contrast ratio even from an angle which allows the dark tones to retain their depth.
Non-Glare IPS Panel
The IPS (in-plane switching) panel exhibits no glare and allows several people to view the monitor with minimal colour shift.
LED Backlight Cuts Power by 40%
The LED backlight reduces energy consumption by 40% compared to a conventional backlight. It is also mercury-free for less impact on the environment when it is eventually disposed of.
Brightness Modulation Minimizes Flicker
To counteract the flicker that is noticeable by some users at low brightness settings, EIZO uses PWM (pulse width modulation) technology. This helps prevent eye fatigue for a more comfortable work environment.
Features for Creative Work
Uniformity from Corner to Corner
Fluctuations in brightness and chromaticity on different parts of the screen are a common trait of LCD monitors. To counteract this, the monitor incorporates EIZO's patented digital uniformity equaliser (DUE) technology to ensure a Delta-E difference of 3 or less across the screen when the monitor leaves the factory. DUE also counterbalances the influences that a fluctuating ambient temperature may have on colour temperature and brightness to ensure stable image display.
Individually Adjusted at the Factory
The gamma level for each ColorEdge monitor is adjusted at the factory. This is accomplished by measuring the R, G, and B gamma values from 0 – 255, then using the monitor’s 16-bit look-up table (LUT) to select the 256 most appropriate tones to achieve the desired value.
Stable Display within Seven Minutes of Startup
From the time it is turned on it typically takes 30 minutes or longer for a monitor’s brightness, chromaticity, and tone characteristics to stabilise. EIZO has shortened this warm-up time by more than 75% to a mere 7 minutes. For confirming your work in a photo studio or taking your monitor with you on location, you can get to work right away.
10-Bit Simultaneous Display
Using the DisplayPort input, the monitor offers 10-bit simultaneous colour display* from a 16-bit look-up table which means it can show more than one billion colours simultaneously. This is 64 times as many colours as you get with 8-bit display which results in even smoother colour gradations and reduced Delta-E between two adjacent colours.
*A graphics board and software which support 10-bit output are also necessary for 10-bit display.
Automatic Readjustment of Colour Mode Preset with Internal Sensor
With the built-in SelfCorrection sensor, you can maintain the monitor at one of the colour mode presets without using any software. When the monitor is calibrated at the EIZO factory, the SelfCorrection sensor measure’s the LCD panel’s white point and stores it to the monitor. When readjusting, the monitor compares the stored value for white point against the current value and corrects any difference.
The HDMI input supports I/P (interlace/progressive) conversion for converting the interlace signals from TV and video into progressive signals for flicker-free display.
Simple and Precise Calibration with ColorNavigator
The bundled ColorNavigator software makes calibration both simple and quick. Just input target values for brightness, white point, and gamma. The built-in sensor directly utilises the monitor's look-up table and creates an ICC profile within minutes.
Predictable Colour with Any Media
With content published on so many different types of printed and digital media it's critical to know how your clients will see colour. A ColorEdge monitor and the bundled ColorNavigator software let you do just that as they are designed for both softproofing and digital device emulation. So now you can "predict" how colour will appear to your clients whether you produce content for printed media like books and magazines or for digital media devices like tablets, smart phones, and notebook computers.
Comfort and Convenience
DisplayPort, HDMI, and DVI-D inputs are included and support resolutions up to 2560 x 1440. The HDMI input also offers direct connection with digital cameras. Two USB upstream ports allow two computers to be connected at once so it’s not necessary to reconnect the USB cable when using the ColorNavigator software and switching between the two computers.
Smooth Display of Video
For video editing or post production work, an overdrive circuit is included to reduce grey-to-grey response time to 6 ms and ensure that moving images look clean and sharp with a minimum of ghosting.
Adjust the screen to the most comfortable angle for you and reposition it to show your work to a colleague or client. The monitor comes with a versatile stand that offers height, tilt, and swivel adjustments as well as portrait mode display.
Optional Shading Hood for Portrait and Landscape Modes
Most shading hoods can only be used in landscape mode, but a unique hood that is designed for portrait mode as well is available as an option.
Ideal for Video Editing and Post Production
Film is usually shot at 24 frames/second and looks unnatural when played back on a typical monitor that displays 60 frames/second. The HDMI input supports a video signal display rate of 1080/24p frames-per-second so you can edit the film as it was meant to be viewed.