Lee Foundation Holder Kit + ND Grad Set (Hard Edge ) + Standard Adapter Ring.
The Lee Foundation Holder Kit + ND Grad Set ( Hard Edge ) Standard Adapter Ring has all the essential items to get started with the Lee Filters system. The Lee Filters Foundation Holder allows use of the entire selection of the Lee 100mm filter system. It clips easily on to the adapter ring by a spring loaded catch and can be rotated once fitted. Assembled with two filter slots. the kit is supplied with an additional third set of filter slots, longer screws and a screwdriver, all fitted inside a padded case.
This Lee Filters Foundation Holder Kit + Lee Standard Adapter Ring combination is supplied with a standard adapter ring of choice. This combination is designed to work with the standard and longer focal length lenses of practically all camera makes.
The Foundation Kit is fundamental to the LEE Filters system.
It takes standard 100mm filters, and can be constructed to take up to three filters at any one time (remember, though, the more filter guides added, the higher the likelihood of vignetting with wideangle lenses). The Foundation Kit, like all others, clips onto the adaptor ring which, in turn, screws onto your camera’s lens.
The Formatt Hitech Firecrest 100 Holder mounts a 82mm polariser internally. Utilising a rotating 82mm adapter ring, the filter is easily turned using the control wheel on the side of the holder. Not only does it allow for a smaller, flatter and less cumbersome combination but the supplied Formatt Hitech Firecrest 82mm Ultraslim filter can be used on it’s own! With it’s highly efficient Firecrest Multicoating the filter reduces the danger of flare to a minimum