TWD Sensor Cleaning Kits including Lint-Free Pec Pads

TWD Sensor Cleaning Kits

The TWD Sensor Cleaning Kits are available in two sizes – standard and jumbo.

PEC PAD’s are strong, non-abrasive, lint-free and pure (99.999%).

They are so soft and versatile that they can be safely used to clean all types of sensitive surfaces such as scanners, CD’s, mirrors, lenses, telescopes, even ink jet print heads.

E-Wipes are conveniently packaged to combine an ultra pure lint-free wipe (Pec Pad) with a precise pre-measured amount of a sterile, highly refined alcohol mixture (Eclipse Fluid).

ECLIPSE Optic Cleaning Fluid is the highest purity lens cleaner available . It dries as quickly as it can be applied, leaving absolutely no residue.

TWD Sensor Cleaning Kit Standard

Single Pack of Pec Pad’s

• Extremely strong, lint-free
• PEC*PADs are so soft and pure (99.999%) it is almost impossible to scratch sensitive surfaces
• PEC*PADs are so soft they can be safely used to clean all types of sensitive surfaces : scanners, CD’s, mirrors, lenses, telescopes etc
• When PEC*PADs are used with PEC-12, they are ideally suited for cleaning photographic film and print emulsions.
• Pack of 100

£15.85 + Vat

ECLIPSE™ Lens & CCD Cleaner (59ml Bottle)

ECLIPSE™ lens cleaner is the highest purity lens and sensor cleaner available.

It dries as quickly as it can be applied, leaving absolutely no residue.

Apply several drops to a Photographic Solutions Sensor Swab™ then wipe the sensor with the swab in both directions using each side of the swab once only.
Always dry clean a sensor first, before wet cleaning with a swab. Please see our help and guidance section for sensor cleaning advice.

For lens cleaning, use with Photographic Solutions PEC*PAD photo wipes, it is possible to clean only the portion of lens which is dirty eliminating “hazy swirls”.

Dispense several drops onto a clean, folded PEC*PAD and lightly wipe surface in a single direction. Refold pad to expose a clean side and re-wipe as necessary.

Other lens tissues may not work as well, and some experimentation may be required.

Bottle contains 59 ml. (2 fl. oz.) with dropper applicator.

ECLIPSE™ is guaranteed by the manufacturer.

Note: This fluid must only be used for cleaning the sensor or sensor filter surface and/or the glass parts of your lens/filter. If you need advice on cleaning other parts of your camera equipment, please ask us. We will be happy to help.